DF-06Foundational
SCADA/Historian Connectivity & TSDB
Gets the live sensor data out of the control system safely and stores it at full resolution, which almost nothing else on this site does.
Data FoundationIoTIT
HS-01FoundationalWave 1AIIoT
Field Safety Computer Vision
In one sentence
Uses the cameras already installed to spot missing protective equipment, people in restricted zones and unsafe proximity to lifting operations.
The problem
CCTV on a site is recorded and reviewed after an incident. A supervisor cannot watch forty screens, so the cameras function as an investigation tool rather than a prevention tool.
How it works
Detection and tracking models run on an edge GPU at the site, evaluating each camera against configured rules: protective equipment by zone, exclusion zones around lifting and hot work, man-down detection. Video never leaves the site and only the event record — timestamp, camera, rule, cropped frame — is stored, with retention set by the operator.
Data required
- Existing IP cameras with adequate resolution and framing for the zones of interest
- Site layout with zone definitions and applicable rules per zone
- Edge GPU appliance at the site
- A labelled sample of site imagery for tuning to local equipment and clothing
What you get
- Real-time alerts to the control room and the HSE supervisor’s device
- Leading-indicator dashboard by zone, shift and rule
- Evidence package for toolbox talks, with faces blurred by default
What it cannot do
Detection accuracy falls at night, in dust and rain, and at long range, and a camera framed for general surveillance is frequently not framed well enough for a reliable protective-equipment call. Typical deployments need some camera repositioning. This produces leading indicators for supervision and is not a safety instrumented function.
Every capability page states a real limitation. If a vendor cannot tell you where their product stops, you are not being told the truth about where it starts.
Related capabilities
- HS-06Foundational
Personnel & Asset Tracking
Knows who is on site and roughly where, so a muster after an alarm takes minutes instead of a headcount by radio.
HSE, Emissions & SecurityIoTIT - HS-02Intermediate
Gas Leak & Flame Detection
Adds optical gas imaging and flame detection on camera to the fixed point detectors, so a leak between detectors is still seen.
HSE, Emissions & SecurityAIIoT - HS-04Foundational
Intelligent Flare Monitoring
Watches the flare on camera to confirm it is lit, estimate how much is being burned, and detect smoking or incomplete combustion.
HSE, Emissions & SecurityAIIoT - HS-05Foundational
Equipment Nameplate & Tag OCR
A technician photographs a nameplate and the equipment record is created or matched, instead of being typed from memory later.
HSE, Emissions & SecurityAI