Conectividad SCADA/Historian y Base de Datos de Series Temporales
Gets the live sensor data out of the control system safely and stores it at full resolution, which almost nothing else on this site does.
Compares what the string should weigh and how hard the pumps should work against what is actually measured, and flags the gap.
Torque-and-drag modelling is usually done in the office, once, on planned geometry. The rig then drills a hole that is not the planned geometry.
Without a live comparison, a friction factor drifting from 0.25 to 0.40 over a section goes unnoticed until the string will not run to bottom.
A soft-string model with an optional stiff-string correction is run continuously against the surveyed trajectory, back-calculating the friction factor from every pick-up, slack-off and rotate-off-bottom measurement. Hydraulics runs the same way: predicted standpipe pressure and ECD versus measured, with the residual attributed to cuttings load, bit nozzle wear or a washout.
Everything is physics-based and auditable. There is no learned component in the core calculation, which is why it is classed foundational.
Soft-string modelling underestimates torque in high-dogleg and in stiff-BHA cases; the stiff-string correction narrows but does not close that gap. Surface torque measurement quality on older top drives is often poor enough to dominate the error budget, and we calibrate against the rig’s own instrument before quoting any accuracy.
Cada página de capacidad declara una limitación real. Si un proveedor no puede decirle dónde termina su producto, no le están diciendo la verdad sobre dónde empieza.
Gets the live sensor data out of the control system safely and stores it at full resolution, which almost nothing else on this site does.
Checks the planned and actual well path against every other well on the pad, with the survey uncertainty included.
Rate of penetration is how fast the bit makes hole. This recommends the weight and rotation speed that make it fastest without wrecking the bit.
Mud that disappears into the formation is telling you something about how easily fluid moves through the rock. This reads that signal instead of discarding it.
Warns that the string is becoming hard to move, typically twenty to sixty minutes before it stops moving at all.