Volúmenes de pozo y tiempo de circulación
Annular and string volumes section by section, then the strokes and the minutes to bottoms-up and to a full circulation.
Perforación
Torque y arrastre — modelo soft-string
Pick-up, slack-off and rotating hookload and surface torque from a survey, a string tally and a friction factor.
Cargando el cálculo…
Este cálculo se ejecutó en tu navegador. Ningún valor que introdujiste se envió a ningún sitio, y nada se guardó.
Cómo se calcula
- Johancsik soft-string: normal force Fn = √[(Ft·Δα·sinĪ)² + (Ft·Δθ + W·sinĪ)²] on each 30 ft element.
- Axial force integrates from the bit upwards: ΔFt = W·cosĪ ± μ·Fn, with the sign set by direction of travel.
- Torque accumulates as μ·Fn·r with r the pipe radius. Rotating off bottom carries no axial friction, which is why it sits between pick-up and slack-off.
- Buoyancy factor = 1 − MW/65.5, applied to every element weight.
Estándares que habla
Dónde deja de ser cierto
Soft string means the pipe is treated as a cable: it carries no bending stiffness and touches the wall everywhere. That is a good approximation for drill pipe in a smooth hole and a poor one for stiff BHA components through a dogleg, for anything in compression, and for a well with a tortuous, wiggly survey. Once slack-off goes into compression the model is outside its range and the answer it gives is optimistic. A single friction factor per hole section is also a fiction that absorbs cuttings beds, key seats and differential sticking into one number.
La capacidad que automatiza esto
- DR-05Predicción de Atrapamiento de TuberíaWarns that the string is becoming hard to move, typically twenty to sixty minutes before it stops moving at all.
- DR-06Torque, Arrastre e Hidráulica en Tiempo RealCompares what the string should weigh and how hard the pumps should work against what is actually measured, and flags the gap.
Herramientas relacionadas
ECD y presión de fondo circulante
Annular pressure loss, flow regime and the equivalent circulating density the formation actually sees while the pumps are running.
Hidráulica de barrena y selección de boquillas
Total flow area, nozzle pressure drop, HSI and jet impact force — plus the nozzle size that would put the optimum share of pump pressure at the bit.
Survey direccional — curvatura mínima
Paste MD, inclination and azimuth and get TVD, northings, eastings, dogleg severity, vertical section and closure — with the well path drawn.