تخطيط الفحص القائم على المخاطر
Allocates a fixed inspection budget to the equipment where failure would hurt most and is most likely, with the reasoning written down.
Predicts where a line is corroding fastest and how long it has left, so inspection and replacement go where the risk actually is.
Corrosion management is driven by inspection intervals set years ago and by coupon data from a handful of locations. The lines that fail are frequently not the lines that were being watched.
Corrosion rate is modelled per segment from water chemistry, flow regime, temperature, CO2 and H2S partial pressures and inhibitor availability, then calibrated against inline inspection and ultrasonic thickness history. Remaining life per segment drives an inspection plan ranked by risk rather than by calendar.
Predicted rates are averages over a segment, and the failures that matter are localised pitting and microbiologically influenced corrosion, which are driven by local conditions the model does not see — a low point holding water, a dead leg, a failed coating. Model output complements inline inspection and does not justify extending an inspection interval on its own.
كل صفحة قدرة تذكر حداً حقيقياً. إن لم يستطع المورّد إخبارك أين يتوقف منتجه، فلم يُقل لك الحق عن أين يبدأ.
Allocates a fixed inspection budget to the equipment where failure would hurt most and is most likely, with the reasoning written down.
Predicts where wax, hydrate, scale or slugging will form in the flowline before the line blocks.
Works out which injector is actually supporting which producer, and where the injected water is being wasted.
Flies or drives the inspection route so that people do not have to work at height or enter confined spaces as often.
Tunes separator and desalter operation to meet the export specification with less chemical, less heat and fewer off-spec events.