الأدوات

• محوّل الوحدات النفطية

  Twenty-one families of upstream units, converted in one place — including the awkward ones like bbl/ft, psi/ft and millidarcy.

• الكثافة النوعية API وتصحيح الحرارة

  °API, specific gravity and density at 15 °C from a density observed at any temperature, with the volume correction factor that gets you there.

• وزن الطين والتدرج والضغط الهيدروستاتيكي

  Mud weight in any unit to a gradient and a hydrostatic pressure at any TVD — and the same calculation run backwards to an equivalent mud weight.

• محوّل التواريخ الهجرية والميلادية والشمسية

  One date in three calendars, for the daily drilling report that is dated in one and the contractor report that is dated in another.

• أحجام البئر وزمن الدوران

  Annular and string volumes section by section, then the strokes and the minutes to bottoms-up and to a full circulation.

• الكثافة المكافئة أثناء الدوران وضغط القاع

  Annular pressure loss, flow regime and the equivalent circulating density the formation actually sees while the pumps are running.

• هيدروليك اللقمة واختيار الفوهات

  Total flow area, nozzle pressure drop, HSI and jet impact force — plus the nozzle size that would put the optimum share of pump pressure at the bit.

• المسح الاتجاهي — الانحناء الأدنى

  Paste MD, inclination and azimuth and get TVD, northings, eastings, dogleg severity, vertical section and closure — with the well path drawn.

• ورقة القتل — طريقة الحفار

  Kill mud weight, initial and final circulating pressure and the step-down schedule, for rehearsal and for checking a sheet that has already been worked.

  أداة تدريب

• أقصى ضغط سطحي مسموح وتدرج التكسر

  Turn a leak-off or integrity test into a fracture gradient, a maximum allowable mud weight and the surface pressure the shoe will take.

• مواد الترجيح لتغيير وزن الطين

  Sacks of barite to take a system from one mud weight to another, the volume it adds, and how much mud to discard if the pits cannot grow.

• أحجام ملاط الأسمنت والإزاحة

  Slurry volume, sack count, mix water and displacement volume for a primary cement job, from the geometry and the intended top of cement.

• العزم والسحب — نموذج السلسلة المرنة

  Pick-up, slack-off and rotating hookload and surface torque from a survey, a string tally and a friction factor.

• تحليل منحنى الانحدار

  Paste a rate history and get an Arps fit — qi, Di and b — with the time to the economic limit, remaining reserves and an EUR.

• منحنى أداء التدفق الداخل

  One well test turned into an inflow performance curve, a productivity index and an absolute open flow.

• تحسين حقن الغاز الرافع

  Fit a gas-lift performance curve through your injection tests and find both the technical peak and the point where the next MSCF stops paying for itself.

• التدرج الساكن وضغط القاع

  Bottom-hole pressure from a wellhead reading — a liquid gradient for oil and water, and a stepwise gas-column integration for gas.

• اختبار تصاعد الضغط — النفاذية والتلف

  A Horner plot from your shut-in pressures, with the semilog slope turned into permeability, skin, p* and flow efficiency.

• الرفع الديناميكي الكلي للمضخة الغاطسة

  Total dynamic head from net lift, tubing friction and discharge pressure, then the stages and shaft power that head implies.

• المعدلات ونسبة الماء ونسبة الغاز والجاهزية

  Gross to net, cut to WOR, gas rate to GOR, and on-stream rates to calendar-day rates — the arithmetic every production report repeats and half of them get wrong.

• خواص PVT من الارتباطات

  Bubble point, solution GOR, Bo, oil and gas viscosity, z-factor and Bg from gravity, temperature and pressure — the module the other reservoir tools call.

• الحجوم الأصلية باستخدام مونت كارلو

  The volumetric equation run tens of thousands of times over triangular distributions, returning P90, P50 and P10 instead of one number that pretends to be certain.

• موازنة المواد للغاز — P/z

  Paste reservoir pressure against cumulative production and read gas in place off the intercept, with z computed at every point rather than assumed constant.

• غربلة طرق الاستخلاص المعزز

  Ten EOR methods checked against your reservoir and fluid properties, each one told to say exactly which criterion rules it out.

• أدنى ضغط امتزاج

  CO₂ and lean-gas MMP from three independent correlations, corrected for injectant impurities, with the spread between them shown rather than averaged away.

• ترددات عيوب المحامل

  BPFO, BPFI, BSF and FTF from bearing geometry and shaft speed, with the harmonics and the minimum spectrum Fmax you need to see them.

• معدل التآكل والعمر المتبقي

  Two thickness readings turned into a short-term and a long-term rate, a remaining life and the next inspection date API 510 and 570 would set.

• المتانة المتبقية وفق B31G

  A metal-loss defect assessed by both original and modified B31G, giving the failure pressure, the safe operating pressure and the longest defect your MAOP can carry.

• سماكة جدار الأنبوب وأقصى ضغط تشغيل

  Required wall thickness and maximum allowable operating pressure under B31.3, B31.4 or B31.8, with the class location, joint and temperature factors applied.

• هبوط الضغط في خط الأنابيب

  Single-phase liquid by Darcy–Weisbach with a real Colebrook friction factor, and gas by Weymouth with both Panhandle equations alongside it.

• تحجيم صمام التنفيس وفق API 520

  Required orifice area for vapour or liquid relief, mapped onto the nearest API 526 standard orifice.

• تحجيم الفواصل ثنائية وثلاثية الطور

  Vessel diameter and length from Souders–Brown gas capacity and liquid retention time, with the constraint that actually governs made visible.

• تحويل الميثان المنفّس إلى مكافئ ثاني أكسيد الكربون

  A vented or fugitive gas volume converted to tonnes of methane and tonnes of CO₂ equivalent on both the 20- and 100-year horizons, with an OGMP 2.0 reporting level attached.

• كثافة الحرق وانبعاثات الاحتراق

  Flare volume per barrel, the CO₂ from combustion and the methane that slips through unburned — with the combustion efficiency as the dial that matters.

• حد الاشتعال للخليط — لوشاتلييه

  The lower and upper explosive limits of a multi-component gas, and where a measured atmosphere sits against them.

• تقدير سعة تخزين السلاسل الزمنية

  Tag count, sample rate and retention turned into terabytes, plus the edge buffer you need to survive a link outage of a given length.

• تقدير مشروع المسح الضوئي للأرشيف

  Pages and scan quality turned into storage, processing hours and — the part that actually sets the schedule — the size of the human review queue.

• عرض النطاق لموقع نائي

  Tags, report rate and protocol turned into the kilobits per second a link has to carry — including the backfill surge after the link comes back.

جرى هذا الحساب داخل متصفحك. لم يُرسل أي رقم أدخلته إلى أي جهة، ولم يُحفظ شيء.