مانا بترو

الإنتاج والرفع

اختبار تصاعد الضغط — النفاذية والتلف

A Horner plot from your shut-in pressures, with the semilog slope turned into permeability, skin, p* and flow efficiency.

كل الأدوات

المدخلات

Build-up data

Shut-in time in hours, and the pressure at that time.

صفΔtPressure
1
2
3
4
5
6
7
8
9
10
11
12
13

Increase until the line is straight and the R² stops improving.

الصخر والمائع

1/psi. Typically 1×10⁻⁵ to 2×10⁻⁵.

النتائج

يجري تحميل الحساب…

جرى هذا الحساب داخل متصفحك. لم يُرسل أي رقم أدخلته إلى أي جهة، ولم يُحفظ شيء.

كيف تُحسب

  • Horner time (tp + Δt)/Δt on a log axis against shut-in pressure; the late-time points form the radial-flow straight line.
  • k = 162.6·q·B·μ/(m·h) from the slope m of that line.
  • s = 1.151·[(P₁hr − Pwf)/m − log₁₀(k/(φμct·rw²)) + 3.2275], with P₁hr read off the fitted line rather than off the data.
  • p* is the line extrapolated to a Horner time of 1; ΔPskin = 0.87·m·s.

المعايير التي تتحدثها

أين تتوقف عن الصحة

Horner analysis assumes an infinite-acting homogeneous reservoir, a single constant rate before shut-in, and that the line you fitted is radial flow rather than storage or a boundary. Real tests break at least one of those routinely. p* is not average reservoir pressure — it needs a Matthews–Brons–Hazebroek correction for the drainage shape, which this tool does not apply. A derivative plot decides where the radial line is; a semilog plot alone can be fitted to almost anything, which is why the fit window is yours to move.

القدرة التي تؤتمت هذا العمل

أدوات ذات صلة