Adds optical gas imaging and flame detection on camera to the fixed point detectors, so a leak between detectors is still seen.
Fixed gas detectors cover points, and a leak a few metres away from one in the wrong wind direction can run for a long time without triggering an alarm.
Optical gas imaging cameras and standard thermal cameras feed detection models at the edge that identify plume and flame signatures and estimate plume direction. Output is treated as an operator aid that complements the certified fire and gas system, never as a replacement for it.
Optical gas imaging sensitivity depends on gas composition, background temperature contrast and wind. Methane against a cold sky is easy; the same leak against a hot equipment background may be invisible. This never replaces the certified fire and gas system and carries no safety integrity level rating.
كل صفحة قدرة تذكر حداً حقيقياً. إن لم يستطع المورّد إخبارك أين يتوقف منتجه، فلم يُقل لك الحق عن أين يبدأ.
Uses the cameras already installed to spot missing protective equipment, people in restricted zones and unsafe proximity to lifting operations.
Builds a methane inventory from measurements rather than from emission factors, at the level of detail OGMP 2.0 actually asks for.
Watches the flare on camera to confirm it is lit, estimate how much is being burned, and detect smoking or incomplete combustion.
Flies or drives the inspection route so that people do not have to work at height or enter confined spaces as often.
Watches the control network passively for devices, traffic and commands that should not be there.